Select Page

Cast LINEAR POWER SUPPLIES (power supplies with linear regulation) – Single source, dual source, or triple source

Highly reliable mini-modules, mains powered, with maximum thermal dissipation facilitated by epoxy resin internal casting.

Being encapsulated, this power supply becomes a simple component, compact, tropicalized, isolated, and unaffected by moisture or vibrations.

90 basic models, single, dual or triple source, provide fixed or adjustable voltage 5 to 48V (0 to 500V upon request), from 6W to 24W (and new: powers up to 72W).

30 common options offer even more possibilities.

In the standard version, cases are equipped with 2 M3 inserts and 1mm ∅ pins for mounting on printed circuit.

3 other optional mounting possibilities:

  • mounting on wall: with “B” or “BV” block
  • mounting on DIN rail: 2 steel clips “C” to be simply adapted
  • mounting on DIN rail: special “RD” case for DIN rail

Many options and accessories available.
Voltages and currents: adjustable, controllable, or fixed.
Customization upon request: other voltages, currents, settings, mounting systems, etc.

Description

Linear power supplies manufactured in France and interchangeable with various foreign supplies.

Electrical data

  • “Vin” input: 230V ±10% / 50 to 400Hz
  • “Vout” output:
    • fixed voltage model: 1% of nominal Vout (at 20°C)
    • adjustable voltage model: with integrated setting
  • Linear regulation:
    • mains supply 230V varying up to ± 10%: < 10-3 of Vout
    • load ranging from 0 to maximum:
      • 10-3 of Vout for models ≤ 6V
      • 10-3 of Vout for models > 6V
    • Response time: < 30µs
    • Residual ripple: < 1mV rms (< 5.10-4 for 48V to 500V)
    • Dielectric strength inputs / outputs: > 2500V rms under 5mA
    • Isolation inputs / outputs: 4000V DC under 1mA during 1 minute
    • Isolation outputs / mechanical grounding: > 100MΩ under 500V

Protections

  • Overloads and short circuits: fast limitation of the current
  • Excessive temperature rise: firstly, automatic and progressive limitation of the current, and secondly, shutoff.
  • Sealing: IP67 (except for connections)
  • Possible external time-delay fuse: i ≈ power supply (W) / 50V; example: for a supply 5V / 2A → 0.2 A fuse

Standards

  • EN50081
  • EN50082
  • EN60950
  • RoSH

Thermal performances

  • Storage: -40 to +85 °C
  • Operating temperature: -30 to +70°C with 2% decrease of current per degree from 45°C, or from 50°C for metallic cases
  • Temperature coefficient: ≤10-4 of Vout per degree °C

Mounting

  • Two M3 inserts for cases T1,T2, T3, and T4 on its big face
  • Four M3 inserts for cases U and U1

Many options and accessories available.
Voltages and currents: adjustable, controllable, or fixed.
Customization upon request: other voltages, currents, settings, mounting systems, etc.

For more information, please download both PDF documents below:

GENERAL DATA & PERFORMANCES – Linear power supplies

MECHANICAL SPECIFICATIONS – Linear power supplies