Select Page

Isolated and SELF-POWERED converter, current-voltage: 0 to 200mA into isolated 0 to 10V

Current-voltage converter, self-powered, isolated, reduced volume and costs, reduced cabling, increased reliability – 0 to 200mA into 0 to 10V 

This high-efficiency “passive” quadripole converts, isolates and outputs within 0 to 10V analog signals from 0 to 200mA applied to its input.

It does not require any external power supply.

Description

Input:

  • applied signal: 0 to 200 mA (accidental maximum: 400 mA / second) *
  • sensitivity: better than 0.5% of full scale

Output:

  • output signal: 0 to 10V (load ≥ 5 kΩ) *
  • regulation upon no load / on load: better than 2.10-3

* Upon request: other input current and/or output voltage

 

Full-scale accuracy: better than 0.2%

Response time: < 5 ms (can be increased  upon request)

Isolation: 1200 V

Voltage on the input loop: less than 2.2V for input current 200 mA

Power supply: only by the low energy taken on the input loop

Protections:

  • against reversal of connections on the input
  • against accidental overvoltage on input: up to 300 mA
  • against overloads and short-circuits
  • isolation: 1200 V
  • increased reliability because of no external power supply
  • against vibrations; tropicalisation with moulding
  • elimination of the faulty-contact risk (no DIL switch)
  • negligible temperature rise (high performance conversion)
  • electromagnetic compatibility CEM 89 / 336 / CE

Temperatures:

  • coefficient: < 2.10-4 / °C
  • operation: -20°C to +60°C
  • storage: – 40°C to + 90°C

Three modules:

  • DIN rail mounting (RD)
  • wall mounting
  • mounting on printed circuit

For more information about this 0 to 200mA  → 0 to 10V self-powered converter with zero noise interference: PDF

Additional information

Weight 250 g
Dimensions 100 × 90 × 60 mm